Of metal tape sawing machine maintain

  • Time:
  • Click:190
  • source:ACHER CNC Machining
To maintain the kilter of sawing machine, need is done regularly to metal tape sawing machine safeguard. After day-to-day work ends, keep clear of the scrap that gathers on the machine clean. Make curium belt stop roll, open cooling water switch, use cooling water spray gun to clean workbench. Cleared after ending, will curium fall most the position of lower part. 1.

Maintain dailily before operating metal tape sawing machine, undertake checking according to following program: 1.

Oil of 1 examination hydraulic pressure is expressed, whether does capacity of hydraulic pressure oil exceed L red line? When hydraulic pressure oil under L red line when, join 32 right amount to fight with respect to need grind hydraulic pressure oil, cross red line to go up can; 1.

Water meter of 2 examinations cooling fluid, whether to exceed red line, when cooling water under L red line when, need adds proper cooling water juice; 1.

3 examinations curium belt whether be located in the left and right sides to curium guide with around wolfram steel on belt annulus piece between; 1.

4 examinations steel wire is brushed whether be located in toothed root ministry; 1.

Slideway of clamp of activity of stage of 5 pairs of beds adds mechanical oil; 1.

6 pairs send slideway of clamp of float of makings bed stage to add mechanical oil; 2.

Every months maintain 2.

Mouth of oiling of 1 tension slide block uses grease of oil gun infuse 2.

2 passivity annulus oiling mouth uses grease of oil gun infuse 2.

Mouth of oiling of 3 driving pulley uses grease of oil gun infuse 2.

4 steel brush transmission oiling mouth uses grease of oil gun infuse 2.

2 oiling mouth uses 5 gear case grease of oil gun infuse of 6 3 months maintain sawing machine of new metal tape is using 6 months at first, run state to make sawing machine keeps good, change please: 3.

Internal gear of 1 gear case is oily 3.

Hydraulic pressure of gasoline tank of 2 hydraulic pressure is oily 4 maintain every year metal tape sawing machine is using a year, run state to make sawing machine keeps good, change please: 4.

Internal gear of 1 gear case is oily 4.

Hydraulic pressure of gasoline tank of 2 hydraulic pressure is oily CNC Milling CNC Machining