The economy of laser beam machining is combined

  • Time:
  • Click:200
  • source:ACHER CNC Machining
It is to use laser to undertake soldering no matter, cut, still use laser to engrave keep number, the machine tool that always uses laser beam machining has the marked characteristic of efficient, high quality, but opposite taller purchase charge and use safeguard charge to also make small and medium sized business all the time since flinch to its, additional, the manufacturing efficiency with extremely tall machine tool of laser beam machining often does not suit with the effective demand of small and medium sized business. Now, the problem such as contradiction of tall, demand had had charge to change newly. Laser - combine not long ago to what cut into parts, trumpf company will be compound model Trumatic 3000 L machine tool puts in the market. This is one kind increased to rush in machine tool of laser beam machining those who cut treatment function into parts is compound model machine tool, the advantage union that it machines two kinds engineering technology was in one case, whole treatment process can be completed in holding clip. Of workpiece inside, outside outline is OK by laser treatment of the cut of fast, high quality ground that finish, punch is out of shape, the ear of plank, tongue and thread machining can use strong cut into parts, tap craft will finish. Graph 1 use Trumatic3000L laser - to the complex formula that cuts treatment machine tool into parts to be able to install clip to finish full treatment working procedure to use newest development to succeed strong tool set is provided and diffuse the TCF with cool style - I laser, this kind of laser - pledge to any ability that reduce modular machine tool to be able to finish the biggest ply to be 4mm the full treatment task of plank, its greatest strong pressure can amount to 165kN, punch production metre can be amounted to 600 times / Min. The power of its CO2 laser is 2kW, having very good laser quality (K ＝ 0.

9) , laser Cutting speed can amount to 8m/min (1mm is thick board) , 3 M/min (4mm is thick board) with 1.

8m/min (stainless steel or aluminium board) . The optical technology of half drift the laser equipment manufacturer of another world-class -- the new product that not long ago of Amada Haan company also rolled out them -- strong cut into parts - laser plank machining center, it contains what be weighed to be " half drift " optical system EMZ-Z 3510-NT, this system assures to be able to be in only by treatment plank X coordinate direction is mobile, and right now, direction of axis of laser edge Y can fix his optimal work place automatically. It allows to use a rate cut sheet metal with 20m/min, the high-energy laser of its high-power -- the laser of 4kW power is OK economy finishs stainless steel efficiently board and the cut treatment of aluminium board, process 6mm stainless steel among them board cut speed can amount to 4m/min. Introduce according to Amada company, its " half drift " optical system can provide very good help for the user when metallic stuff is cut off. Stem from safe consideration, long-term since have all the time " strong finally cut into parts " the journey, and this " strong finally cut into parts " often be redundant sky strong reduce the travel, the result is to waste time for nothing, and " half drift " optical system avoided this problem well. Machining center of this kind of knockdown can be finished 1000 times / of Min strong cut into parts, can achieve 1800 times below special condition / of Min strong reduce rate, strong cut force into parts to be able to amount to 300kN, workbench dimension is 2.

5m × 1.

27m. Per sec. is machined 5.

The largest size is the plank that Byspeed 4020 of company of 5 aperture Bystronic's newest machine tool of high speed laser beam machining can machine 4m × 2m, it not only can the rate cut with 28m/min is sharp outline, and OK also apace cut round hole and square aperture, the per sec. below top speed can be machined 5.

5 aperture. The center of laser beam machining of company of graph 2 Amada is contained " half drift " optical system, be allowed to move in X direction only by treatment plank in treatment Fang Konghe grows Fang Kongshi, this machine tool used scanning technology: Have cut in X direction above all, have cut in Y coordinate direction next, is not the overall cut that finishs an aperture according to traditional method. Two kinds of laser sources that design by oneself have 4 each.

4kW and 5.

The power of 2kW, can need to undertake choosing by the user. The material that uses ARC technology to be able to make stimulate beam of light to press plank undertakes adjustment with ply character, the diameter that stimulates beam of light keeps changeless inside whole cut limits, say according to manufacturer, after using this one technology, the cut that can assure to accumulate plank in bedding face has very high kerf quality in the process. Still high speed of laser of a kind of diminutive is in charge of material to produce equipment -- " Mini Master " laser Great Master, it is the product that by Weil Engineering finite liability company puts the market on, it can finish length to be for 20 ～ 250mm, ply 0.

4 ～ 2mm, diameter is the short pipe production of 25 ～ 65 Mm. The biggest characteristic of this one machine tool is OK offer continuously makings. Very high automation rate can realize fast product to change model (most 10min) . Can solder hourly 1200 pipe fitting, and still allow an user to be received in laser beam welding, protection of WIG active gas solders and minim plasma solders 3 kinds solder undertake choosing in means. This kind of machine tool is in 3 yuan of car muffle, catalysis implement, there is first-rate applied perspective in the production of fuel filter, transmission and IHU component. CNC Milling CNC Machining